Características
• Fiberglass Reinforced Polyester (FRP), NEMA Type 4X enclosure with stainless steel cover screws
• Jumpers to enable/disable a load cell
• PreVent™ breather vent
• Conformal coated circuit board
• Number of cells: 2, 3 or 4 single cells
• Expansion port
Descripción
Ideal for use as a sub-junction box in a multiple modular system, the JB4SP TuffSeal™ signal trim junction box sums two or four single load cell outputs with the potential to expand through the included expansion port. The Fiberglass Reinforced Polyester (FRP), NEMA Type 4X enclosure is optimal protection against harsh environments. The JB4SP TuffSeal signal trim junction box is ideal for use in tank and hopper scale applications.
Especificaciones
Cable Fittings:
(4) PG7 0.118-0.255 strain relief
(2) PG11 0.197-0.394 strain relief
(1) PreVent™ breather vent
Enclosure:
Molded FRP (NEMA Type 4X) enclosure with overlapping solid cover, stainless steel screws
Connectors:
Spring clamp screwless, 12-28 AWG
Trimming:
Individual cell, signal trim
Potentiometers:
100 K ohms, 25 turn cermet
Circuit Board:
3.8 in x 2.3 in (96.5 mm x 58.4 mm), with conformal coating
Warranty:
One-year limited warranty