VPG Revere HPS Stainless Steel, Single Point Load Cell

Características

The HPS stainless steel, welded-seal, low-profile single-point load cell is designed for bench scale and checkweigher applications in caustic/acidic environments. The HPS is insensitive to off-center loading and tolerates most severe washdowns. Capacities range from 13.2 pounds to 100 pounds (six kilograms to 45.4 kilograms). This load cell comes complete with 10 feet (3.1 meters) of load cell cable.



Descripción



Especificaciones

Full Scale Output:
3.0 mV/V–(25-100 lb)
2.0 mV/V–(6 kg)

Output Resistance:
350 ohms +/- 7

Input Resistance:
400 ohms +/-6

Material/Finish:
Stainless steel

Temperature:
Operating range
0°F to 150°F/-18°C to 65°C

Manufacturer Model Number:
HPS-D3-XX-10P5

Safe Overload:
150% Full scale

Rated Excitation:
10 V AC/DC (15 V maximum)

Combined Error:
0.03% Full scale

Non-repeatability:
0.01% Full scale

Insulation Resistance:
5000 megohms

Seal Type:
Welded-seal, IP67

Cable Length:
10 ft/3.1 m

Cable Color Code:
Green ………………….+ Excitation
Black …………………..– Excitation
White …………………….+ Signal
Red ………………….– Signal

Warranty:
One-year limited warranty

Approvals:
FM