Características
The RL50210SS single-ended beam, stainless steel load cell is designed for tension or compression applications. Capacities range from 25 pounds to 500 pounds (11.3 kilograms to 226.8 kilograms). This load cell comes complete with 20 feet (6.1 meters) of load cell cable. A stainless steel sleeve over the gauge area protects the RL50210SS stainless steel construction.
Descripción
Especificaciones
Full Scale Output:
3.0 mV/V
Bridge Resistance:
350 ohms, nominal
Material/Finish:
Stainless steel
Temperature:
Operating range
0°F to 150°F/-18°C to 65°C
Safe Overload:
150% Full scale
Rated Excitation:
10 V DC (15 V maximum)
Nonlinearity:
0.03% Full scale
Hysteresis:
0.05% Full scale
Insulation Resistance:
5000 megohms
Deflection at Capacity:
25-50 lb=.008 in/.20 mm,
100 lb=.010 in/.25 mm,
150 lb=.012 in/.30 mm,
250 lb=.016 in/.41 mm,
500 lb=.025 in/.64 mm
Seal Type:
Environmentally sealed stainless steel sleeve, IP67
Cable Length:
20 ft/6.1 m
Cable Diameter:
.200 PVC jacket
Cable Color Code:
Red………………….+ Excitation
Black…………………..– Excitation
Green …………………….+ Signal
White ………………….– Signal
Warranty:
Two-year limited warranty
Approvals:
FM