Características
- Weighbridge modules for creating custom lengths
- 75,000 lb capacity load cells and pre-assembled mounts
- Junction box(es) appropriate for number of load cells utilized
- NTEP-Certified, CC #98-011
- 90,000 lb Concentrated Load Capacity (CLC)
- Up to 270,000 lb full scale capacity
- Span deflection ratio (1:3100) for legal highway loads
- Eight-inch thick reinforced concrete deck
- Three standard widths: 11, 12 and 14 ft
- Up to 42 ft section span
Descripción
The SURVIVOR SR for above-ground installation is available with either a steel or concrete deck. For unbeatable strength and lifelong use, the SR model offers Rice Lake’s wide-flange I-beam construction throughout the weighbridge; and massive wide-flange I-beams on either side of the SR distinguish it from other scale series.
Weighbridge Design
The SR concrete or steel deck models are ruggedly designed with massive outboard beams available in a bolted or welded design. Permanent heavy-duty side rails add strength and rigidity and serve as guides as drivers pull on and off the scale.The rugged, reinforced load cell pockets offer easy side access to load cells and mounting assemblies. The SR series ships as a legal highway load from factory to installation site—no permits, no road restrictions and no restricted travel times.
Lightning Protection
Every SURVIVOR truck scale comes complete with a surge voltage protection system. The junction box is provided with individual transient circuitry protection. The entire system is grounded to a single-point grounding system connected to the power ground. With the introduction of single point grounding, you will not experience the loss of load cells associated with other competitive designs.
Durable Finish
All SURVIVOR scales are thoroughly cleaned before painting to remove mill scale, oils or other surface contaminants. An asphalt undercoating is applied to the interior and underside of the entire scale. Galvanized support pans are placed on concrete deck versions. A high-performance epoxy primer is applied to all steel before the specialized hard-coat alkyd enamel completes the process.